Meマモーレ

PC のために Meマモーレ をダウンロード

最終更新日:

Meマモーレ の説明

転倒検知送信機「Meマモーレ EXH-BTTK2」(以下、EXH-BTTK2)は、内蔵されたセンサーを使って、一定時間倒れ込んでいることや一定時間動きがないこと、あるいは、非常ボンタンが押されたをアプリに対して通知し、通知を受けたアプリは登録された連絡先に通報をします。

【対応機種】
Android4.4以上をインストールしたBluetoothLE対応の端末。
※Android4.3以下の端末、あるいは、BluetoothLEに未対応の端末ではご利用できません。

【特徴】
■異常を通報する
EXH-BTTK2の内蔵されたセンサーによって装着した人が一定時間倒れ込んでいる、一定時間動けないでいる、あるいは、装着した人が非常ボタンを推した場合に、「どのEXH-BTTK2」が「いつ」「どこ」で「どのような異常」が発生したか、Eメール、SMS、電話を使って予め登録した連絡先に通報をします。

※通報はウェブサービスを経由して行うため、必ずデータ通信ができる状態でご利用ください。
※場所の検知にはスマートフォンの位置情報を利用します。正しく通報するためにはスマートフォンの位置情報を有効にしてください。
※連絡先の保存、通報には専用のウェブサービスへの登録が必要です。

■条件を設定する
EXH-BTTK2が異常と見なすための条件はアプリから設定することができます。設定した条件はEXH-BTTK2内のメモリに保存されるので、利用の度に書き換える必要はありません。

■通報先を設定する
通報先は、EXH-BTTK2毎に紐付いた状態でウェブサービスに登録します。アプリから参照、設定することができます。

■1つのアプリに5台まで登録可能
1つのスマートフォンで5台のEXH-BTTK2を登録することが可能です。通報時にはどのEXH-BTTK2が異常であるかも合わせて伝えるので、現場で気付かない場合も、通報先に異常を伝えることが可能です。

【注意事項】
○利用には専用ウェブサービスへのユーザー登録が必要です。詳しくはEXH-BTTK2のマニュアルを御覧ください。
○EXH-BTTK2を接続中、バックグラウンドでGPS情報の更新を続るため、バッテリーの消費が大きくなる場合があります。
Fall detection transmitter “Me Mamore EXH-BTTK2” (hereinafter, EXH-BTTK2), using the built-in sensor, that there is no thing or a certain period of time movement that is fell dramatically a certain period of time, or, very Bontang has been pressed It was notified to the application, the application which has received the notification and the report to the contacts that are registered.

【Compatible models】
Installed BluetoothLE compatible terminal Android4.4 or more.
※ Android4.3 following terminal, or not available in unsupported terminal to BluetoothLE.

【Characteristic】
■ report abnormalities
Person wearing by using a built-in sensor of EXH-BTTK2 is in fell dramatically a certain period of time, are not able to move a certain period of time, or if the person wearing was pushing the panic button, “which EXH-BTTK2” is “when” “where” in “any abnormality” or has occurred, and E-mail, SMS, the report to the contacts that you have pre-registered using the telephone.

※ order to carry out report is via a web service, please use in a state in which it is always data communication.
※ The detection of the location and use of the position information of the smartphone. Please enable position information of the smart phone in order to report correctly.
※ storage of contacts, the report must be registered to the dedicated web service.

■ set the conditions
Conditions for EXH-BTTK2 is regarded as abnormal can be set from the app. Since the set conditions are stored in the memory of the EXH-BTTK2, you do not need to be rewritten every time of use.

■ set the report destination
Report destination is registered in the web service in a state in which the attached string to each EXH-BTTK2. Reference from the app, you can set.

■ can be registered up to five units in one app
It is possible to register a five EXH-BTTK2 in one of the smart phone. Since tell together may be any EXH-BTTK2 is abnormal at the time of report, even if you do not notice in the field, it is possible to tell the abnormality in the report destination.

【Notes】
○ The use requires a user registered to the dedicated web service. Please refer to the manual of EXH-BTTK2 for more information.
While connecting the ○ EXH-BTTK2, for Zokuru to update the GPS information in the background, there are times when the battery consumption of the increases.
エラーログをエクスポートし、電子メールの添付ファイルにできる
エラーログを消せる
一部の不具合を修正しました

 

最小 PC 要件

最小: お使いのデバイスは、最高の経験 OS のためのこれらの要件を満たす必要があります-Windows の10バージョン10586.0 またはそれ以上の, Xbox one.

アーキテクチャ: x64、x86

 

PC 上で Meマモーレ を使用する方法

 

あなたは、あなたの PC で Meマモーレ のようなアプリケーションを使うことを夢見ていますか?pc-Windows または MAC での作業 Meマモーレ を取得するには、以下の手順に従ってください。
 

[wp_ad_camp_1]

 

1. これらの Android エミュレータのいずれかをダウンロード

 

推奨:

i. Bluestacks: ダウンロードはこちら
ii. Nox ( より高速なのでお勧め ): ダウンロードはこちら

このアプリケーションは、PC/Mac ユーザーのために利用できて、そして作り付けのグーグル PlayStore を持っています。これは、コンピュータ上の電話のように動作し、あなたのコンピュータ上で Meマモーレ を実行できるようになります。

インストールプロセス全体で、アクティブなインターネット接続が必要です。

 

2. エミュレーターアプリをコンピューターにインストールする

これは、インターネット接続と PC に応じて2〜5分かかる場合があります。アプリを起動し、Gmail でサインインします。

 

インストール手順:

3. Bluestacks ホーム画面で、検索アイコンをクリックし、 “Meマモーレ ” を入力して、[検索] をクリックします。[インストール] をクリックして表示される多くのアプリケーションから適切なアプリを選択します。

4. ダウンロードしたすべてのアプリケーションがホーム画面に表示され、エミュレーターの “マイアプリ ” タブを使用して最小化またはアクセスできます。

5. アプリを起動し、pc で Meマモーレ の使用を開始します。

 

パソコンでアプリを楽しもう!!!

 

BlueStacks は安全ですか?

Bluestacks は、Windows または Mac デバイス上で Android アプリやゲームを実行するためのエミュレータです。ウィルスでも何でもないそれは完全にリスクフリーです。



1. BlueStacks を使用して PC に Meマモーレ をインストールします。


BlueStacks は、あなたが PC 上で Android アプリを実行することができますアンドロイドアプリプレーヤーです.Bluestacks を搭載した PC にアプリをインストールする手順は次のとおりです。

  • 開始するには、 PC 用 BlueStacks をインストール
  • PC で BlueStacks を起動する
  • BlueStacks が起動したら、エミュレータの [マイアプリ] ボタンをクリックします。
  • 検索する: Meマモーレ
  • Meマモーレ アプリの検索結果が表示されます。インストールする
  • あなたの Google アカウントにログインして、Bluestacks で Google Play からアプリをダウンロードしてください
  • ログイン後、インターネット接続に応じて Meマモーレ のインストール処理が開始されます。


APK ダウンロードリンク




Meマモーレ のアプリ情報

アプリ 名 Meマモーレ
パッケージ名 jp.co.exsight.memamore
バージョン 1.0.3
評価
サイズ 22.3 MB
要件 Windows 10/8/7, Windows Surface, Mac 0S
更新
インストール 100+
カテゴリー Apps, Lifestyle