ホームモニタ

PC のために ホームモニタ をダウンロード

最終更新日:

ホームモニタ の説明

★★★【注意!】 [開く]と[アンインストール]のみ表示される場合には、下記リンク先の手順に従って更新してください。★★★
http://www.sharp.co.jp/support/hems/howto_up_rs.html
[更新]または[インストール]ボタンが表示されている場合はそのボタンを押して更新作業を行ってください。

※ ホームモニタのバージョンアップを行った後は、中継器と接続を確認後、タブレットを再起動してください。再起動後、中継器のファームウェアの更新通知が表示された場合は、画面の案内に従って中継器のファームウェアも更新してください。

▼対応端末
シャープ製電力見える化システム(JH-RTP1/2)に付属のタブレットRW-T107(JH-RH01)
※ シャープ製電力見える化システム専用のアプリケーションです。
※ シャープ製電力見える化システムをお持ちで無い方はご利用いただけません。

[更新履歴]
バージョンH0.1.68
・「クラウドHEMS」へ移行する際の利用規約を改訂しました。

バージョンH0.1.67
・「クラウドHEMS」へ移行する際の利用規約を改訂しました。

バージョンH0.1.66
・「クラウドHEMS」へ移行する際の利用規約を改訂しました。

バージョンH0.1.65
・「クラウドHEMS」へ移行する際の利用規約を改訂しました。

バージョンH0.1.64
・「クラウドHEMS」へ移行する際の利用規約を改訂しました。

バージョンH0.1.62
・流量データ送信機(ガス/水道使用量の計測)をご利用のお客様についても「クラウドHEMS」への移行ができるよう対応しました。

バージョンH0.1.61
・「クラウドHEMS」への移行に対応しました。
 ※「クラウドHEMS」の機能紹介はこちら
  http://www.sharp.co.jp/e_solution/hems/
 ※「クラウドHEMS」への移行作業は下記リンク先の手順に従って行ってください。
  http://www.sharp.co.jp/support/hems/info_mieruka_up.html
 ※「クラウドHEMS」へ移行せず、そのまま「ホームモニタアプリ」をご使用いただくことも可能です。

バージョンH0.1.30
・流量データ送信器での測定に対応しました。

バージョンH0.1.21
・シャープ製蓄電池との連携に対応しました。
・ECHONET Liteに対応しました 。(対象デバイスは蓄電池です)

バージョンH0.1.10
・単回路・多回路CTセンサーユニット測定に対応しました。
・階、部屋、機器、発電機の名前を新規入力できるようにしました。
・消費電力量グラフ画面での操作性を向上しました。

※ 流量データ送信機・蓄電池・CTセンサーユニットは別売です。
※ 流量データ送信機・蓄電池・CTセンサーをご購入されていないお客様でもバージョンアップ可能です。バージョンアップを実施する事により、上記の諸機能が改善されます。また、ECHONET Lite やCTセンサーに関するボタンや文言が表示がされるようになりますが、蓄電池やCTセンサーを接続するまでは機能致しません。
★★★ [Caution! If that is displayed only [Open] and [Uninstall, please update in accordance with the procedure of the following links. ★★★
http://www.sharp.co.jp/support/hems/howto_up_rs.html
If [update] or the [Install] button is displayed, please do the update work by pressing the button.

※ After performing the version-up of the home monitor, after confirming the connection to the repeater, please restart the tablet. After the restart, if the update notification of the firmware of the repeater is displayed, please also update the firmware of the relay in accordance with the instructions on the screen.

▼ corresponding terminal
Sharp power visualization system (JH-RTP1 / 2) to the supplied tablet RW-T107 (JH-RH01)
※ It is manufactured by Sharp power visualization system dedicated application.
※ is not available those who do not have a Sharp power visualization system.

[Change log]
Version H0.1.68
– Revised Terms and Conditions at the time of the transition to “cloud HEMS”.

Version H0.1.67
– Revised Terms and Conditions at the time of the transition to “cloud HEMS”.

Version H0.1.66
– Revised Terms and Conditions at the time of the transition to “cloud HEMS”.

Version H0.1.65
– Revised Terms and Conditions at the time of the transition to “cloud HEMS”.

Version H0.1.64
– Revised Terms and Conditions at the time of the transition to “cloud HEMS”.

Version H0.1.62
Flow rate data transmitter also about your available (measurement of gas / water usage) is now supported to allow the transition to “cloud HEMS”.

Version H0.1.61
· Added support for the transition to “cloud HEMS”.
※ function introduction of “cloud HEMS” is here.
http://www.sharp.co.jp/e_solution/hems/
※ migration to the “cloud HEMS”, please go according to the following procedure link destination.
http://www.sharp.co.jp/support/hems/info_mieruka_up.html
※ does not shift to “cloud HEMS”, it is also possible if you use as it is a “home monitoring application”.

Version H0.1.30
Added support for the measurement of flow rate data transmitter.

Version H0.1.21
· Added support for cooperation with Sharp battery.
· ECHONET has been supported Lite. (Target device is battery)

Version H0.1.10
· Added support for single-circuit and multi-circuit CT sensor unit measurement.
· Floor, room, equipment, was as the name of the generator can be new input.
– Improved the operability of the power consumption amount graph screen.

※ flow rate data transmitter, battery · CT sensor unit is sold separately.
※ It is possible version up even at a flow rate of the data transmitter, battery · CT sensors have not been purchased customers. By carrying out the version up, the above-mentioned various functions are improved. In addition, it will be a button or language on ECHONET Lite and CT sensor is the display, but will not function until you have connected the storage battery and the CT sensor.
★★★【注意!】 [開く]と[アンインストール]のみ表示される場合には、説明欄をお読みください。★★★
(アンインストールを行うと、タブレットの設定情報が消えてしまいますので行わないでください。)
[更新]または[インストール]ボタンが表示されている場合はそのボタンを押して更新作業を行ってください。
バージョンH0.1.68
・「クラウドHEMS」へ移行する際の利用規約を改訂しました。
 ※「クラウドHEMS」の機能紹介はこちら
  http://www.sharp.co.jp/e_solution/hems/
 ※「クラウドHEMS」への移行作業は下記リンク先の手順に従って行ってください。
  http://www.sharp.co.jp/support/hems/info_mieruka_up.html
 ※「クラウドHEMS」へ移行せず、そのまま「ホームモニタアプリ」をご使用いただくことも可能です。

 

最小 PC 要件

最小: お使いのデバイスは、最高の経験 OS のためのこれらの要件を満たす必要があります-Windows の10バージョン10586.0 またはそれ以上の, Xbox one.

アーキテクチャ: x64、x86

 

PC 上で ホームモニタ を使用する方法

 

あなたは、あなたの PC で ホームモニタ のようなアプリケーションを使うことを夢見ていますか?pc-Windows または MAC での作業 ホームモニタ を取得するには、以下の手順に従ってください。
 

[wp_ad_camp_1]

 

1. これらの Android エミュレータのいずれかをダウンロード

 

推奨:

i. Bluestacks: ダウンロードはこちら
ii. Nox ( より高速なのでお勧め ): ダウンロードはこちら

このアプリケーションは、PC/Mac ユーザーのために利用できて、そして作り付けのグーグル PlayStore を持っています。これは、コンピュータ上の電話のように動作し、あなたのコンピュータ上で ホームモニタ を実行できるようになります。

インストールプロセス全体で、アクティブなインターネット接続が必要です。

 

2. エミュレーターアプリをコンピューターにインストールする

これは、インターネット接続と PC に応じて2〜5分かかる場合があります。アプリを起動し、Gmail でサインインします。

 

インストール手順:

3. Bluestacks ホーム画面で、検索アイコンをクリックし、 “ホームモニタ ” を入力して、[検索] をクリックします。[インストール] をクリックして表示される多くのアプリケーションから適切なアプリを選択します。

4. ダウンロードしたすべてのアプリケーションがホーム画面に表示され、エミュレーターの “マイアプリ ” タブを使用して最小化またはアクセスできます。

5. アプリを起動し、pc で ホームモニタ の使用を開始します。

 

パソコンでアプリを楽しもう!!!

 

BlueStacks は安全ですか?

Bluestacks は、Windows または Mac デバイス上で Android アプリやゲームを実行するためのエミュレータです。ウィルスでも何でもないそれは完全にリスクフリーです。



1. BlueStacks を使用して PC に ホームモニタ をインストールします。


BlueStacks は、あなたが PC 上で Android アプリを実行することができますアンドロイドアプリプレーヤーです.Bluestacks を搭載した PC にアプリをインストールする手順は次のとおりです。

  • 開始するには、 PC 用 BlueStacks をインストール
  • PC で BlueStacks を起動する
  • BlueStacks が起動したら、エミュレータの [マイアプリ] ボタンをクリックします。
  • 検索する: ホームモニタ
  • ホームモニタ アプリの検索結果が表示されます。インストールする
  • あなたの Google アカウントにログインして、Bluestacks で Google Play からアプリをダウンロードしてください
  • ログイン後、インターネット接続に応じて ホームモニタ のインストール処理が開始されます。


APK ダウンロードリンク




ホームモニタ のアプリ情報

アプリ 名 ホームモニタ
パッケージ名 jp.co.sharp.ems.app.homemonitor
バージョン H0.1.68
評価 ( 4 )
サイズ 10.8 MB
要件 Windows 10/8/7, Windows Surface, Mac 0S
更新
インストール 1,000+
カテゴリー Apps, Tools