マルチ残高リーダFree /Suicaやnanacoなど対応

PC のために マルチ残高リーダFree /Suicaやnanacoなど対応 をダウンロード

最終更新日:

マルチ残高リーダFree /Suicaやnanacoなど対応 の説明

Suica・PASMO・WAON・nanaco・Edy・ICOCA・TOICA・SUGOCA・Sapica・Kitaca・manaca・はやかけん・nimoca・PiTaPa・icsca・りゅーと・ecomyca・OKICA・IruCa・Asaca・hanica・その他のSuica互換カードの残高を確認できます。また、nanaco・WAONについてはポイントやポイントの有効期限も確認することができます。
(WAONはカード内ポイントのみ参照可能です。センター内ポイントは見れません)

★Xperia X Performance / Xperia XZ / Xperia XZs をご利用の方へ
通常の端末と異なり、端末裏側ではなく、”端末正面の画面の左上”にカードをタッチさせてください。その際には、画面にカードで傷をつけないようにご注意ください。

※磁気カードが使えなくなる恐れがありますので、磁気カードを読み取ろうとしないでください。スマホの取扱説明書に書いてありますとおり、スマホ本体が発する電磁波により磁気カードに悪影響を与えます。なお、基本的に磁気カードは、読み取り機にスライドさせる、もしくは挿入するタイプのものです。本アプリが対応するのは、読み取り機にタッチするタイプ(Felica)です。

★ご利用にあたって
・スマホカバーが付いていると端末によっては読み取りづらい場合があります。読み取れない場合は、スマホカバーを外してご利用ください。
・Androidを4.4→5.0にアップグレードしてから読み取れなった場合は、「おサイフケータイ」アプリを起動してみてください。アップデートの案内が出た場合は、案内に従ってアップデートすることで読み取れるようになる場合があります。
(「おサイフケータイ」はFeliCa Networks, Ink.の商標です)

★お問い合わせの際は、迷惑メールフィルタ設定にて、[email protected]からの受信を許可していただくか、キャリアメール以外(GmailやYahooメール)にて送信していただくようお願いします★
こちらの返信が届かないケースが多々あります。

★特殊な機能のご紹介
「未知なカードの解析」機能を使えば、社員証や学生証といった未知なカードの残高も読み取れます。
(Felica搭載カードに限ります。ただし、すべてのFelica搭載カードを読めるようになるわけではありません。)

未知なカードの残高を読み取れるようにするにはカードを解析して、残高書式を特定する必要があります。

解析するには、次の4つの条件が必要です。
1.FeliCaを搭載したカードであること(磁気式、バーコード式でないカード)
2.残高がカードに記録されていること
3.残高が256円以上あること
4.ユーザが最後にカードを利用した際の残金を覚えていること

*磁気カードを端末に近づけないでください。端末の磁気でカードが使えなくなる恐れがあります。

ユーザが覚えた残高を手がかりにカードを解析し、残高書式を特定します。
一度書式を特定してしまえば、カードをスマホにかざすだけで、残高をいつでも確認できるようになります。

<<カード書式の解析方法>>
1.カードの最終利用時に残金を覚えておきます
2.アプリを起動し、設定(右上の点3つ)をタッチし、さらに「特殊な設定を表示」にチェックを入れます
3.「未知なカードを解析」を選択します
4.覚えておいた残金を入力し、「次へ」をクリックします
5.カードをかざすとカード書式の解析が始まります
6.書式の候補が複数存在する場合には、1つ選んでください
(後で選びなおすことも可能です。アプリではどれが最適か判断できませんので、トライ&エラーで最適な書式を選択してください)

★有料版との差異★
有料版では、広告が表示されません。
本アプリを気に入っていただいた方は、有料版に移行することで、
開発を応援していただけるとうれしいです。

ちなみに以下のカードの残高は読み取れません。
・Hareca、いばっピ(残高が暗号化されているため)
・Tカード、majica(磁気カードのため)※端末に近づけないでください。
・ポンタカード(バーコード式カードのため)
・Taspo(FeliCa非搭載のため)

★その他の注意点
・本アプリはNFC機能を利用します。おサイフケータイ対応でもNFC非搭載端末にはインストールできません。
・一部端末(主にGalaxy)はバッテリーにNFCのアンテナが内蔵されています。このような機種にて、純正以外のバッテリーに交換してしまうと、カードに全く反応しなくなってしまいます。ご注意ください。
・端末が高温になるとNFCを検出できなくなる場合があります。端末が高温の場合には、冷ましてからご利用ください。
Suica · PASMO · WAON · nanaco · Edy · ICOCA · TOICA · SUGOCA · Sapica · Kitaca · manaca · hayakaken · nimoca · PiTaPa · icsca · lute · ecomyca · OKICA · IruCa · Asaca · hanica · Other you can check the balance of Suica-compatible card. In addition, the nanaco · WAON You can also check the expiration date of the point or points.
(WAON are visible only card in point. Center in the point is not seen)

★ to the person who uses the Xperia X Performance / Xperia XZ / Xperia XZs
Unlike the normal terminal, rather than the terminal back, please the card to touch the “upper-left corner of the screen of the terminal front”. In that case, please be careful not to scratch the card on the screen.

※ because it may become unusable magnetic card, please do not try to read the magnetic card. As is written in the instruction manual of the smartphone, it will adversely affect the magnetic card by an electromagnetic wave emitted by the smartphone body. The basic magnetically card is slid into the reader, or is of a type that insertion. That the present application corresponds is the type to touch the reader (Felica).

★ Terms and Conditions of Use
• When Sumahokaba is with you may be hard to read by the terminal. If you can not read, please use remove the Sumahokaba.
• The 4.4 → When it becomes read from the upgrade to 5.0 Android, please try to start the “mobile wallet” application. If the guidance of the update came out, it might be read by updating according to the guide.
( “Osaifu-Keitai” is a FeliCa Networks, a trademark of Ink.)

★ When contacting us, in the junk e-mail filter settings, or have you allowed to receive from shekeenlab @ gmail.com, and then ask you to send in other than the carrier e-mail (Gmail and Yahoo Mail) ★
This reply does not reach case there are many.

★ Introduction of special features
With the “unknown analysis of the card” feature, also read the balance of the unknown card, such as an employee ID card or student card.
(As long as Felica mounted card. However, it does not become able to read all of the Felica mounted card.)

To read the balance of the unknown card analyzes the card, you must identify the balance format.

To parse, you must have the following four conditions.
1. It is cards with FeliCa (magnetic, non-barcode type card)
2. That the balance has been recorded on the card
3. That the balance is equal to or more than 256 yen
4. That the user is to remember the balance at the time of using the last card

* Please do not close the magnetic card to the terminal. There may not use a card with a magnetic terminal.

It analyzes the card to clue the balance that the user has to remember, to identify the balance format.
Once you have identified the once format, just holding the card to the smartphone, you will be able to check the balance at any time.

The method of analysis << card format >>
1. Remember the balance at the time of the final use of the card
2. Start the app, touch set up (one point 3 of the upper-right corner), check the further “display a special setting”
3. Select the “analysis of the unknown card”
4. Enter the balance that had to remember, and click the “Next”
5. Analysis of the card format will begin when holding the card
6. If the format of the candidates there is more than one, one Please choose
(It is also possible to re-select a later time. Since you can not determine which is the best or in the app, please select the most appropriate format by trial and error)

★ the difference between the paid version ★
In the paid version, the ad is not displayed.
If you had you liked this app, by moving to the paid version,
I’m happy if you are able to support the development.

By the way, I do not read the balance of the following card.
· Hareca, Ibappi (because the balance has been encrypted)
· T card, (for magnetic card) majica ※ Please do not close to the terminal.
– Ponta card (for the bar code type card)
· Taspo (for FeliCa non-equipped)

★ Additional Notes
• This app will use the NFC function. Even in Osaifu-Keitai it can not be installed in the NFC non-powered devices.
• Some terminals (mainly Galaxy) has a built-in NFC antenna to the battery. In such a model, and it will replace the battery of non-genuine, will no longer exactly the reaction to the card. Please be careful.
– terminal it may not be able to detect the NFC and a high temperature. If the terminal is a high temperature, please use to cool down.
v1.8.2 Android8.0で起動できない問題を修正しました。
v1.8.1 ポイント有効期限が0pのときもお知らせしてしまう問題を修正しました。
v1.8.0 ポイントの有効期限が近くなると読み取り完了時にお知らせする機能を追加しました。
v1.7.3 一部の電子マネーを読み取れない問題を修正しました。
v1.7.2 読み取り速度を少し改善しました。自動起動をオフするオプションをわかりやすくしました。
v1.7.1 残高書式の有料版へのエクスポート時にエラーになってしまう問題を修正しました(無料版のみ)。
v1.7 Hanicaをサポートしました。カードを検出でアプリを自動起動させないオプションを特殊な設定に追加しました。未知なカードの解析機能を強化しました。また、アプリの起動速度を改善しました。

対応カードは以下の通りです。
Suica・PASMO・WAON・nanaco・Edy・ICOCA・TOICA・SUGOCA・Sapica・Kitaca・manaca・はやかけん・nimoca・PiTaPa・DESUCA・icsca・Hanica・その他のSuica互換カード

 

最小 PC 要件

最小: お使いのデバイスは、最高の経験 OS のためのこれらの要件を満たす必要があります-Windows の10バージョン10586.0 またはそれ以上の, Xbox one.

アーキテクチャ: x64、x86

 

PC 上で マルチ残高リーダFree /Suicaやnanacoなど対応 を使用する方法

 

あなたは、あなたの PC で マルチ残高リーダFree /Suicaやnanacoなど対応 のようなアプリケーションを使うことを夢見ていますか?pc-Windows または MAC での作業 マルチ残高リーダFree /Suicaやnanacoなど対応 を取得するには、以下の手順に従ってください。
 

[wp_ad_camp_1]

 

1. これらの Android エミュレータのいずれかをダウンロード

 

推奨:

i. Bluestacks: ダウンロードはこちら
ii. Nox ( より高速なのでお勧め ): ダウンロードはこちら

このアプリケーションは、PC/Mac ユーザーのために利用できて、そして作り付けのグーグル PlayStore を持っています。これは、コンピュータ上の電話のように動作し、あなたのコンピュータ上で マルチ残高リーダFree /Suicaやnanacoなど対応 を実行できるようになります。

インストールプロセス全体で、アクティブなインターネット接続が必要です。

 

2. エミュレーターアプリをコンピューターにインストールする

これは、インターネット接続と PC に応じて2〜5分かかる場合があります。アプリを起動し、Gmail でサインインします。

 

インストール手順:

3. Bluestacks ホーム画面で、検索アイコンをクリックし、 “マルチ残高リーダFree /Suicaやnanacoなど対応 ” を入力して、[検索] をクリックします。[インストール] をクリックして表示される多くのアプリケーションから適切なアプリを選択します。

4. ダウンロードしたすべてのアプリケーションがホーム画面に表示され、エミュレーターの “マイアプリ ” タブを使用して最小化またはアクセスできます。

5. アプリを起動し、pc で マルチ残高リーダFree /Suicaやnanacoなど対応 の使用を開始します。

 

パソコンでアプリを楽しもう!!!

 

BlueStacks は安全ですか?

Bluestacks は、Windows または Mac デバイス上で Android アプリやゲームを実行するためのエミュレータです。ウィルスでも何でもないそれは完全にリスクフリーです。



1. BlueStacks を使用して PC に マルチ残高リーダFree /Suicaやnanacoなど対応 をインストールします。


BlueStacks は、あなたが PC 上で Android アプリを実行することができますアンドロイドアプリプレーヤーです.Bluestacks を搭載した PC にアプリをインストールする手順は次のとおりです。

  • 開始するには、 PC 用 BlueStacks をインストール
  • PC で BlueStacks を起動する
  • BlueStacks が起動したら、エミュレータの [マイアプリ] ボタンをクリックします。
  • 検索する: マルチ残高リーダFree /Suicaやnanacoなど対応
  • マルチ残高リーダFree /Suicaやnanacoなど対応 アプリの検索結果が表示されます。インストールする
  • あなたの Google アカウントにログインして、Bluestacks で Google Play からアプリをダウンロードしてください
  • ログイン後、インターネット接続に応じて マルチ残高リーダFree /Suicaやnanacoなど対応 のインストール処理が開始されます。


APK ダウンロードリンク




マルチ残高リーダFree /Suicaやnanacoなど対応 のアプリ情報

アプリ 名 マルチ残高リーダFree /Suicaやnanacoなど対応
パッケージ名 jp.co.shekeen.BalanceReaderFree
バージョン 1.8.2
評価 ( 4977 )
サイズ 1.0 MB
要件 Windows 10/8/7, Windows Surface, Mac 0S
更新
インストール 500,000+
カテゴリー Apps, Shopping
開発者